Technical Specifications

Acoustic Performance

Configuration Powered subwoofer, ported
Frequency Response (-3 dB) 45 Hz – 250 Hz
Maximum Peak SPL 135 dB
Crossover Frequency 90 Hz

Transducer

LF Transducer 1x18" Ferrite
Voice Coil Diameter 4"

Amplifier

Type Class D
Total Power Output 2,000W Peak (1,000 RMS)
LF Power 2 x 500W bridged (1000W total)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz

Connections and Controls

Input Channels 2 line
Input Connector Types 2 combo
Line Input Impedance 10 kΩ
Maximum Input +22 dBu
Output Connector 2 XLR (M): Mix out, Direct out
Controls Output Level
Low Pass Filter
Preset Select
Polarity Invert On/Off
Mono On/Off
Front LED On/Off
Indicators DSP Preset, Polarity Invert On/Off, Mono On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP

Presets Extended LF
Polarity Normal or Reverse
Bit Depth 24-bit
Sample Rate 96 kHz

Enclosure

Material Eucalyptus Plywood
Finish Chemline™ polyurethane
Grille Powder-coated steel
Dimensions (HxDxW) 22.5” x 25” x 24.5” (572 mm x 635 mm x 622 mm)
Unit Weight 95 lbs. (43 kg)
Handles 2 (One on each side)

Safety

Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection limiter

Power

AC Power Input 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power) 150W

Suspension Mounting

Rigging Points 12 M10
Mounting Ground stack provisions

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.