Technical Specifications

Acoustic Performance

Configuration Active 2-way
Frequency Response (-3 dB) 48 Hz – 18 kHz
Frequency Response (-10 dB) 42 Hz – 19 kHz
Nominal Coverage (-6 dB) 120° x 20° per enclosure
Maximum Peak SPL 131 dB
Crossover Frequency 420 Hz

Transducer

LF Transducer 12” (2.5” voice coil)
HF Transducer 8 x 2” (1” Voice Coil)

Amplifier

Type Class D
Total Power Output 2000W Peak, 1000W Program (500W RMS)
LF Power 1000W Peak, 500W Program (250W RMS)
HF Power 1000W Peak, 500W Program (250W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz
Mains Connection powerCON™ In and Out

Connections and Controls

Input Channels 1 Line
Input Connector Types 1 XLR
Line Input Impedance 40 kΩ
Maximum Input +4 dBu
Output Connector Direct Line Out (XLR)
Networking Dante® (Audio and Control), Control (only) via Locking Ethernet
Controls Preset Select
HPF On/Off
Indicators Over Temperature, Signal, -3 dB, Limiter, Clip, Network Status

DSP

Effects Compression, Limiting, Delay, 8-band EQ and preset selection via WorxControl
HPF 90 Hz, 4th-order Butterworth
Bit Depth 24-bit
Sample Rate 48 kHz

Enclosure

Material 15 mm Eucalyptus plywood
Finish Chemline™ Polyurea
Grille Powder-coated steel
Dimensions (HxWxD) 18.6” x 20.8” x 17.5” (473 mm x 529 mm x 444.5 mm)
Unit Weight 65 lbs. (29.5 kg)

Safety

Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection Limiter

Power

AC Power Input 90-260V~, 50-60 Hz
AC Power Consumption (1/8 Power) 4.2 Amps

Suspension Mounting

Rigging Points Integrated Rigging (10:1 load)
Mounting Dual-position pole mount (0° and 10°) 35 mm

Optional Accessories

Rigging CDL Rigging Grid, CDL Rigging Extension Bar, CDL Rigging Sling
Other CDL12-Tote Tote Bag

As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.