Computer system requirements:

Below are the minimum computer-system requirements for the AudioBox iOne and AudioBox iTwo:

macOS®

  • macOS® 10.13 or higher (64-bit only)
  • Intel® Core™ i3 or better
  • Minimum 4GB RAM / Recommended 8GB or more

Windows®

  • Windows® 10 (64-bit only)
  • Intel® Core™ i3/AMD A10 processor or better
  • Minimum 4GB RAM / Recommended 8GB or more

Mac and Windows Systems

  • USB 2.0 port
  • Internet connection
  • Internal or external 7200 RPM storage drive highly recommended
  • 30 GB hard disk space
  • Monitor with 1366x768 resolution

Apple iPad

  • iPad® Pro, iPad Air, iPad mini with Retina display, iPad (4th generation)
  • iOS® 9.0.3 or higher
The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio or MIDI signals. Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.

VST Compatible Logo ASIO Compatible Logo

VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH

Technical Specifications

Mi​crophone Preamp

Type XLR female, balanced
Frequency Response (±3.0 dB) 10 Hz to 40 kHz
Input Impedance (Balanced) 1,200Ω
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.008%
S/N Ratio (Unity Gain, Ref. = +4 dBu, 20 Hz to 22 kHz) > 95 dB
Common Mode Rejection Ratio (1 kHz, 52 dB Gain) > 65 dB
Gain Control Range (± 1 dB) 0 dB to 52 dB
Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu
Phantom Power (±2 VDC) +48 VDC

Line Input

Type
Input Impedance

Instrument Input

Type ¼" TS female, unbalanced
Input Impedance 1 MΩ

Line Outputs

Type ¼" TRS female, balanced
Output Impedance 51Ω

Headphone Output

Type ¼" TRS active stereo
Maximum Output 60 mW/ch. @ 60Ω Load
Frequency Response (±1.0 dB) 20 Hz - 30 kHz
Output Impedance 10Ω

MIDI I/O

Type

Digital Audio

ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB
DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) 105 dB
Bit Depth 24
Reference Level for 0 dBFS +10 dBu
Internal Sample Frequency Selections (kHz) 44.1, 48, 88.2, 96
Power USB bus-powered

Physical

Height 1.71” (43.5 mm)
Depth 5.31" (135 mm)
Width 5.91” (150 mm)
Weight 1.35 lbs (0.62 kg)