Computer system requirements:

Below are the minimum computer-system requirements for AudioBox GO. For Studio One system requirements, please click here.

macOS®

  • macOS version 10.13 or later
  • 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates)
  • Available USB port

Windows®

  • Windows 10 or later (64-Bit Only)
  • 200 MB storage space and 4 GB RAM for Universal Control (required for firmware updates and low-latency ASIO support)
  • Available USB port

Chrome OS

For information on compatibility with Chrome OS, click here.

iOS/iPadOS

For information on compatibility with iOS/iPadOS, click here.

Android

For information on compatibility with Android devices, click here.


The above are the hardware system requirements for this product.
DAW software and Operating System requirements vary.

Click here for Studio One’s system requirements.

VST Compatible Logo ASIO Compatible Logo

VST is a registered trademark of Steinberg Media Technologies GmbH
ASIO is a trademark and software of Steinberg Media Technologies GmbH
USB-C® is a registered trademark of USB Implementers Forum
All other trademarks are property of their respective holders

Technical Specifications

Microphone Preamp

Type XLR female, balanced (via Combo connector Input 1)
Frequency Response (±3.0 dB) 20 Hz to 20 kHz
Input Impedance (Balanced) 1.4kΩ
THD+N (unwtd, 1 kHz @ +4 dBu Output, Unity Gain) < 0.004%
Gain Control Range (± 1 dB) 50 dB (0 dB to +50 dB)
Max Input Level (Unity Gain, 1 kHz @ 0.5% THD+N) +10 dBu (± 0.5 dBu, min gain)
Phantom Power (±2 VDC) +48 VDC (±2 VDC)

Line Input

Type ¼" TS female, balanced (via Combo connector Input 1)
Input Impedance 750 kΩ
Max Input Level +19 dB
Gain Control Range 50 dB (-20 dB to +30 dB)

Instrument Input

Type ¼" TS female, unbalanced (Input 2)
Input Impedance 750 kΩ
Max Input Level +13 dB
Gain Control Range 50 dB (0 dB to +50 dB)

Line Outputs

Type ¼" TRS female, impedance balanced
Frequency Response 20 Hz to 20 kHz, +/-0.2 dB
Output Impedance 51Ω
THD+N (1 kHz, 20 kHz BW, A-wtd) <0.007%

Headphone Output

Type ¼" TRS active stereo
Maximum Output 30 mW/ch. @ 60Ω Load
Frequency Response (±1.0 dB) 20 Hz - 20 kHz, +- 0.5 dB
THD+N (1 kHz, max gain, 20 kHz BW, A-wtd) <0.08%
S/N Ratio (1 kHz, max gain, 20 kHz BW, A-wtd) 90 dB

Power

Type Bus Powered

Digital Audio

Connection Type USB 2.0 over USB-C® compatible connection
ADC Dynamic Range (A-wtd, 48 kHz Sample Rate) 90 dB
DAC Dynamic Range (A-wtd, 48 kHz Sample Rate) 102 dB
Bit Depth 24
Reference Level for 0 dBFS +10 dBu
Supported Sample Rates (kHz) 44.1, 48, 88.2, 96

Physical

Height 1.73” (44 mm)
Depth 3.3" (84 mm)
Width 4.25" (108 mm)
Weight 0.51 lb (0.24 kg)