Technical Specifications

Acoustic Performance

Configuration 2-way biamped
Frequency Response (-3 dB) 52 Hz – 18 kHz
Frequency Response (-10 dB) 47 Hz – 20 kHz
Nominal Coverage (-6 dB) 110° x 50°
Maximum Peak SPL 136 dB
Crossover Frequency 1.6 kHz

Transducer

LF Transducer 1x15" Ferrite
Voice Coil Diameter 2.5”
HF Transducer 1.75" compression driver

Amplifier

Type Class D
Total Power Output 1,300W Peak (650 RMS)
LF Power 1,000W Peak (500W RMS)
HF Power 300W Peak (150W RMS)
Cooling Free air convection
Rated THD <0.05% (20 Hz - 20 kHz)
Dynamic Range 119 dB (A-weighted)
Bandwidth 20 Hz - 20 kHz

Connections and Controls

Input Channels 1 mic/line, 1 line
Input Connector Types 2 combo
Mic Input Impedance 1 kΩ
Line Input Impedance 10 kΩ
Maximum Input +22 dBu
Output Connector 2 XLR (M): Mix out, Direct out
Controls Mic/Line Level
Line/Level
Preset Select
HPF On/Off
Front LED On/Off
Indicators DSP Preset, HPF On/Off, Front LED On/Off, Signal, Clip, Thermal

DSP

Presets FOH, MON, DJ
Polarity
HPF 100 Hz, 4th-order Linkwitz-Riley
Bit Depth 24-bit
Sample Rate 96 kHz

Enclosure

Material Eucalyptus Plywood
Finish Chemline™ polyurethane
Grille Powder-coated steel
Dimensions (HxDxW) 28.5” x 17.25” x 16” (234 mm x 438 mm x 406 mm)
Unit Weight 59 lbs. (26.8 kg)
Handles 3 (Top and Sides)
Monitor Angle 30°

Safety

Amplifier Protection Over-current, DC, over/under-voltage, over-temperature, high frequency
Transducer Protection limiter

Power

AC Power Input 100-230V~, 50-60 Hz
AC Power Consumption (1/8 Power) 150W

Suspension Mounting

Rigging Points 12 M10
Mounting 35 mm, 2-position

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.