Computer system requirements:
Below are the minimum computer-system requirements for the MegaStudio FP10 hardware and all included software:
- OS: Microsoft Windows XP
- Computer: Windows compatible computer with FireWire port.
- CPU/Clock: Pentium, Athlon with 900Mhz or higher (1.5GHz)
- Memory(RAM): 1 GB
- OS: MacOS X ver. 10.3.5
- Computer: Apple Macintosh series with on-board Firewire port.
- CPU/Clock: PowerPC G4/800Mhz or higher (G4/Dual 1 GHz recommended), all Intel/Mac models
- Memory(RAM): 1 GB
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) that you might experience while monitoring audio or MIDI signals.
Monitor resolution for both PC and Macintosh should be no lower than 1024x768 pixels.
|Preamp Bandwidth||10Hz to 50kHz|
|Preamp Input Impedance||1.3k Ohms|
|Instrument Input Impedance||1M Ohms|
|Preamp Send Output Impedance||51 Ohms|
|Preamp Return Input Impedance||10K Ohms|
|Line Input Impedance||10k Ohms|
|TRS Output Impedance||51Ohms|
|Preamp TRS Main Outputs Impedance||51Ohms|
|TRS Cue Outputs Impedance||51Ohms|
|Headphone Output||150mW/Ch 20Hz-20kHz|
|Phantom Power||48V +/- 2V|
|Power Supply||Ext line Transformer, Internal Switching|
|Analog to Digital Converters (ADC)||24-Bit / (44.1, 48, 88.2, 96kHz)|
|ADC Dynamic Range||107db|
|DAC||24-bit / up to 96kHz|
|DAC||Dynamic Range 110db|
|Simultaneous record/playback channels and sample rate||Single Unit (10 in, 10out @ 24/96K)
Two FP10's (up to 16 in, 16 out @ 24-bit/ 44.1k or 48K)
Three FP10's (up to 24 in, 24 out @ 24-bit/44.1k or 48k)
Note: FP10's and FirePod's can be daisy-chained
As a commitment to constant improvement, PreSonus Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.