Computer system requirements:

Below are the minimum computer-system requirements for UC Surface, QMix®-UC, and Studio One®.

Mac

  • Mac® OS X 10.11.6 or later
  • Intel® Core™ i5 processor or faster
  • 4 GB RAM (8 GB or more recommended)

Windows

  • Windows® 10 64-bit
  • Intel Core i5 processor or faster
  • 4 GB RAM (8 GB or more recommended)

Mac and Windows Systems

  • Thunderbolt 1 or 2 port (Computer’s motherboard must support Thunderbolt; Thunderbolt 3 systems supported with qualified Thunderbolt 2 adapter.)
  • Internet connection (required for registration and download of included software)
  • 30 GB hard disk space (7200 RPM storage drive or faster highly recommended)
  • Monitor with 1366x768 resolution

iOS (UC Surface)

  • iOS 9.3 or later
  • iPad Pro, iPad Air 2, iPad Air, iPad mini 4, iPad mini with Retina display, iPad (4th generation), iPad mini, iPad (3rd generation), iPad 2


Android (QMix-UC)

  • Android™ 5.0 (Lollipop) or later
  • Android smartphone or tablet
Note: The minimum system requirements may differ for DAWs other than Studio One. Please check the requirements for your DAW of choice with its manufacturer.
Note that the speed of your processor, amount of RAM and size and speed of your hard drive will greatly affect the overall performance of your recording system. Also, a more powerful system (faster processor with more RAM) will allow for lower latency (signal delay) than you might experience while monitoring audio signals.

Technical Specifications

Microphone Preamp

Type XLR Female (via Combo), Balanced
Maximum Input Level +10 dBu (Balanced, min. gain)
Gain Control Range 60 dB
Frequency Response 20 Hz to 20 kHz (±0.15 dB, unity gain, 48 kHz)
20 Hz to 40 kHz (±0.22 dB, unity gain, 96 kHz)
Dynamic Range > 110 dB (A-wtd, min. gain)
Total Harmonic Distortion < 0.005% (1 kHz, min. gain)
EIN < -131 dBu (max gain, 40Ω, 22 kHz BW, A-wtd)
Input Impedance 1.6 kΩ
Phantom Power +48V, > 8 mA per input

Instrument Inputs

Type ¼” TS Female (via Combo), Unbalanced
Maximum Input Level +15 dBu (Unbalanced, min. gain)
Gain Control Range 60 dB
Frequency Response 20 Hz to 20 kHz (±0.2 dB, unity gain, 48 kHz)
20 Hz to 40 kHz (±0.6 dB, unity gain, 96 kHz)
Dynamic Range > 106 dB (A-wtd, min. gain)
Total Harmonic Distortion < 0.005% (1kHz, min. gain)
Input Impedance > 1 MΩ

Line Inputs

Type ¼” TRS Female (via Combo), Balanced
Maximum Input Level + 18 dBu (Balanced, min. gain)
Frequency Response 20 Hz to 20 kHz (±0.05 dB, unity gain, 48 kHz)
20 Hz to 40 kHz (±0.10 dB, unity gain, 96 kHz)
Dynamic Range > 118 dB (A-wtd, min. gain)
Total Harmonic Distortion < 0.005% (1 kHz, min. gain)
Input Impedance 10 kΩ

Main and Line Outputs

Type ¼” TRS Female, impedance balanced
Maximum Output Level +18 dBu (Balanced)
Frequency Response 20 Hz to 20 kHz (±0.05 dB, unity gain, 48 kHz)
20 Hz to 40 kHz (±0.15 dB, unity gain, 96 kHz)
Dynamic Range > 118 dB (A-wtd)
Total Harmonic Distortion < 0.0035% (1 kHz, +4 dBu)
Output Impedance 51Ω

Headphone Outputs

Type ¼” TRS Female, Stereo, Unbalanced, x2
Maximum Output Level 175 mW/channel (56Ω load)
Frequency Response 20 Hz to 20 kHz (±0.5 dB, 48 kHz)
Dynamic Range > 110 dB (A-wtd)
Total Harmonic Distortion < 0.03% (1 kHz)
Headphone Impedance (working range) 16Ω to 300Ω

Crosstalk

Input to Input < -110 dB
Output to Output < -115 dB
Input to Output < -120 dB

Signal Level LEDs

Clip -0.5 dBFS
Signal 1 -2 dBFS
Signal 2 -4 dBFS
Signal 3 -6 dBFS
Signal 4 -10 dBFS
Signal 5 -20 dBFS
Signal 6 -30 dBFS
Signal 7 -50 dBFS

Digital Audio

Connection Type Thunderbolt 2
ADC Dynamic Range 120 dB (A-wtd)
DAC Dynamic Range 120 dB (A-wtd)
Bit Depth 24 bits
Internally Supported Sample Rates 44.1, 48, 88.2, 96, 176.4, 192 kHz

Clock

Jitter < 70 ps RMS (20 Hz – 20 kHz)
Jitter Attenuation > 60 dB (1 ns in => 1 ps out)

As a commitment to constant improvement, PreSonus® Audio Electronics, Inc., reserves the right to change any specification stated herein, at any time, without notification.